Kuryakyn 9878 BLACK VELOCIRAPTOR AIR CLEANER KIT - Manual (Page 3)

PAGE
3
STEP 8
Completely disassemble the Velociraptor Assembly. Make note as to how it is assembled, it will
help for reassembly. FIG 1
STEP 9
Locate the Black Cone from the Velociraptor Assembly. Insert
the three 1/4”–20 Socket Head Cap Screws through the
mounting holes
in the Black Cone from the inside. Place one of
the included non-adhesive backed Gaskets over the three
mounting Screws now protruding from the back of the Black
Cone. DO NOT place a screw through the float bowl vent hole
- this hole is the one in the 10-o’clock position.
STEP 10
While holding a Gasket in place between the Breather Adapter
and Support Bracket- at this time you should have three
Gaskets installed, one directly behind the Black Cone, one between the
Breather Adapter/Support Bracket and one between the Support
Bracket/carb-secure the assembly to the carburetor. PIC 5 DO NOT over
tighten the fasteners; the aluminum will strip easily.
STEP 11 Snap the black Super Ring into place on the installed Velociraptor. Ensure it is
securely snapped into place before continuing with the installation. PIC 6.
STEP 12
Place the Filter into the Velociraptor, secure with the chrome Steel Mesh and
the Outer Ring. Line up the holes in the Mesh with those of the Outer Ring,
secure with five 1/4”-20 x 1/2” Socket Head Cap Screws.
STEP 13
Double check the tightness of all related fasteners, check for hose
clearance and check throttle for correct operation, making sure it
returns properly, before starting bike.
ROTATE THROTTLE AND CHECK THAT IT MOVES FREELY
AND RETURNS TO CLOSED BEFORE STARTING BIKE. FAIL-
URE OF THE THROTTLE TO RETURN COULD RESULT IN
LOSS OF CONTROL CAUSING SERIOUS INJURY OR DEATH.
It is the end user’s responsibility to ensure that all of the fasteners (including
pre-assembled) are tightened before operation of the motorcycle. Küryakyn will
not provide warranty coverage on products or components lost due to improper
installation or lack of maintenance. Periodic inspection and maintenance are
required on all fasteners.
Ride On!
USE 1-1/2” CAP SCREWS HERE
PIC 5
FIG 1
BLACK CONE
SUPER RING
FILTER ELEMENT
MESH SCREEN
OUTER TRIM RING
PIC 6
SUPER RING
BLACK VELOCIRAPTOR AIR CLEANER KIT
INSTALLATION