Kuryakyn 9875 BLACK VELOCIRAPTOR, COMPLETE AIR CLEANER ONLY - Manual (Page 2)

PAGE
2
STEP 2
Refer to FIG 1
.
Completely disassemble the included Velociraptor Assembly. Note that it will be
reassembled in reverse order.
STEP 3 Refer to FIG 1. Locate the Black Cone. Insert the three in-
cluded 1/4”–20 X 1-1/2” Socket Head Cap Screws through the
Black Cone.
DO NOT place a bolt through the hole at the 10-o’clock posi-
tion, it is the float bowl vent-hole.
STEP 4 Align the holes and place one of the included Gaskets over the
three mounting screws now protruding from the back of the
Black Cone.
STEP 5 Place the Adapter Ring over the three screws, then the other
included Gasket, align it with the Bracket and begin the three screws in
their threads.
Leave the screws loose until all three have been started in their threads,
then tighten them.
DO NOT OVERTIGHTEN THE SCREWS
STEP 6
Refer to FIG1. Snap the Plastic Cone into place in the Black Cone. Ensure
it is secure before continuing with the installation.
STEP 7 Refer to FIG 1. Place the Filter Element over the Plastic Cone; secure it
with the Mesh Screen and the Outer Trim Ring.
Align the holes in the Mesh, Outer Trim Ring, and Black Cone; secure the
assembly with the five included 1/4”-20 x 1/2” Socket Head Cap Screws.
STEP 8
Double check the tightness of all fasteners, check for hose clear-
ance and check the throttle for proper operation, making sure it
returns properly, before starting bike.
BLACK VELOCIRAPTOR AIR CLEANER KIT INSTALLATION
Some high performance air cleaners extend beyond
the OEM unit to achieve smoother air flow and bet-
ter perform-
ance. Riding
position may
be affected. It
is important to
familiarize
yourself with
the new riding
position before
operating the
motorcycle.
FIG 1
OUTER TRIM RING
MESH SCREEN
FILTER ELEMENT
PLASTIC CONE
BLACK CONE
ROTATE THROTTLE AND CHECK THAT IT
MOVES FREELY AND RETURNS TO CLOSED BE-
FORE STARTING BIKE. FAILURE OF THE
THROTTLE TO RETURN COULD RESULT IN
LOSS OF CONTROL CAUSING SERIOUS INJURY
OR DEATH.
It is the end user’s responsibility to ensure that all of
the fasteners (including pre-assembled) are tight-
ened before operation of the motorcycle. Kuryakyn
will not provide warranty coverage on products or
components lost or damaged due to improper instal-
lation or lack of maintenance. Periodic inspection
and maintenance are required on all fasteners.
PIC 1
BLACK CONE
PIC 3
FILTER ELEMENT
PIC 2 PLASTIC CONE
PIC 4 OUTER TRIM RING
MESH SCREEN
Ride On!