Kuryakyn 9510 VELOCIRAPTOR AIR CLEANER KIT - Manual (Page 3)

PAGE
3
STEP 8
Completely disassemble the Velociraptor Assembly. Make note as to how it is assembled, it will
help for reassembly. FIG 1
STEP 9
Locate the velocity stack (chrome cone) from the Velociraptor
Assembly. Insert the three 1/4”–20 socket head cap screws
through the mounting holes
in the chrome cone from the
inside. Place one of the included non-adhesive backed gaskets
over the three mounting screws now protruding from the back
of the chrome cone. DO NOT place a bolt through the float
bowl vent hole - this hole is the one in the 10-o’clock position.
STEP 10
While holding a gasket in place between the breather adapter
and support bracket- at this time you should have three
gaskets installed, one directly behind the chrome cone, one between
the breather adapter/support bracket and one between the support
bracket/carb-secure the assembly to the carburetor. PIC 5 DO NOT over
tighten the fasteners; the aluminum will strip easily.
STEP 11
Snap the black Super Ring into place on the installed Velociraptor. Ensure it is
securely snapped into place before continuing with the installation. PIC 6.
STEP 12
Place the filter into the Velociraptor, secure with the chrome Steel Mesh and
the Outer Ring. Line up the holes in the Mesh with those of the Outer Ring,
secure with five 1/4”-20 x 1/2” Socket Head Cap Screws.
STEP 13
Double check the tightness of all related fasteners, check for hose
clearance and check throttle for correct operation, making sure it
returns properly, before starting bike.
ROTATE THROTTLE AND CHECK THAT IT MOVES FREELY
AND RETURNS TO CLOSED BEFORE STARTING BIKE.
FAILURE OF THE THROTTLE TO RETURN COULD RESULT IN
LOSS OF CONTROL CAUSING SERIOUS INJURY OR DEATH.
It is the installer’s responsibility to ensure that all of the fasteners (including
pre-assembled) are tightened before operation of the motorcycle. Küryakyn will
not provide warranty coverage on products or components lost due to improper
installation or lack of maintenance. Periodic inspection and maintenance are
required on all fasteners.
Ride On!
VELOCIRAPTOR AIR CLEANER
INSTALLATION
USE 1-1/2” CAP SCREWS HERE
PIC 5
FIG 1
CHROME CONE
PLASTIC CONE
FILTER ELEMENT
MESH SCREEN
OUTER TRIM RING
PIC 6
SUPER RING