Kuryakyn 8958 STEALTH PASSENGER ARMRESTS - Manual (Page 4)

PAGE
4
STEALTH PASSENGER ARMREST PAD ADJUSTMENT:
STEP 27
Refer to PIC 12 and 13. Locate the set screw on the un-
derside of the armrest mount. Turn the set screw in
(clockwise) to raise the angle of the armrest pad. Turn the
set screw out (counterclockwise) to lower the angle of the
armrest pad.
NOTE: The armrest assembly has been re-
moved from the bike for clarity. There
is no need to remove the armrest as-
sembly to adjust the set screws.
STEALTH PASSENGER ARMRESTS INSTALLATION
Ride On!
It is the end user’s responsibility to ensure that all of the fasteners (including
pre-assembled) are tightened before operation of the motorcycle. Küryakyn
will not provide warranty coverage on products or components lost due to
improper installation or lack of maintenance. Periodic inspection and mainte-
nance is required on all fasteners.
This product was designed for use as a passenger armrest only. Do
not use the armrest to mount or dismount the motorcycle. Do not
apply your full body weight to the armrests to adjust your seating
position
PASSENGER ARMRESTS ARE NOT SAFETY RESTRAINING DEVICES.
FAILURE TO HOLD ONTO THE MOTORCYCLE MAY RESULT IN SERI-
OUS INJURY OR DEATH.
PIC 12
TURN IN TO RAISE THE
ANGLE. TURN OUT TO
LOWER THE ANGLE
BRAKE-SIDE (RIGHT)
PIC 13
USE A 1/16” HEX WRENCH
TO ADJUST THE SET SCREW
BRAKE-SIDE (RIGHT)