Kuryakyn 6355 KINETIC THROTTLE BOSS - Manual (Page 2)

PAGE
2
STEP 3
Place the Kinetic Throttle Boss over the end of the grip and loosely install
the #10-32 X 1/2” socket head cap screw. PIC 3
STEP 4
Position the Kinetic Throttle Boss where it will be the most comfortable
for you at cruising speeds and, making sure the small posts on the Kinetic
throttle Boss line up with the dimples (PIC 4) in the Kinetic Grip, tighten
the cap screw.
Ensure that the installation of this product does not
interfere with the proper operation of the motorcycle
before riding.
It is the installer’s responsibility to ensure that all of the
fasteners (including pre-assembled) are tightened before
operation of the motorcycle. Küryakyn will not provide
warranty coverage on products or components lost due to
improper installation or lack of maintenance. Periodic
inspection and maintenance are required on all fasteners.
Ride On!
KINETIC THROTTLE BOSS
INSTALLATION
PIC 4
PIC 3
PIC 2
END CAP REMOVED
POSTS LINE UP WITH DIMPLES
DIMPLES
SMALL POSTS
TIGHTEN THIS
FASTENER
SECURELY