KOCASO M766 - Manual (Page 34)

32
receiver. (It access to device via the USB host transfer cable). Users need
to download the navigation software and map from the internet, through
the SD card installation (please refer to the Application Management
section of this User Guide). The currently supported on the GPS receiver
type please refer to Appendix.
27 PPPoE SETTINGS
Before using this feature, connect the USB network card via the USB
host transfer cable access to device.
1. Tap Settings → PPPoE settings.
2. Input name and password then click connect to access the broadband
network.
28 ETHERNET
Before using this feature, connect the USB network card via the USB
host transfer cable access to device. When the USB network cable
plugged into the USB network card, you will see the bottom of status bar
ETH symbol appears.
1. Tap Settings → Ethernet.
2. The device can automatically obtain IP address to connect to the
network. You can also choose to manually set the IP address to get
connected.