Tutorial using the blood pressure lowering system, Using the blood pressure lowering system – Kinetik Blood Pressure BPL1 User Manual
Page 11
start in tutorial mode. This mode talks you through each stage of use. Note the icon will be shown
pressing and holding the button (when the unit is off).
9
Tutorial
Using the Blood Pressure Lowering System
On first use (or after the batteries are replaced) the Blood Pressure Lowering System will automatically
on the LCD display while in tutorial mode. You can adjust the volume at any time by pressing the
and buttons. Pressing either the menu button or the button will cancel the tutorial mode. The
tutorial mode can be restarted by pressing and holding the menu button (when the unit is on) or by
Your Blood Pressure Lowering System can be adjusted based on your preferences. If required, you can
change the following settings:
• Music selection
• Breathing indication arrow
• Voice instructions
• Session duration
All of the above settings are listed accordingly in the order they appear when the MENU button is pressed.
10
Using the Blood Pressure Lowering System
•
Music Selection
To select a different tune, press the MENU button once. Then press the UP or
DOWN buttons to select your preferred tune. The tune icon and the selected
tune number will appear on the screen. You have 3 tunes to choose from.
• Breathing Indication Arrow
The breathing indication arrows show when to breathe in and when to breathe
out. By default these are set to on, but can be switched off if you find them to be
a distraction. To turn the breathing indication arrows on or off, press the MENU
button twice. Then, press the UP button to turn it on and the DOWN button to
turn it off. Your display will change accordingly.