Kinetik Blood Pressure BPM1KTL - Manual (Page 17)

Using your Blood Pressure Monitor
Re-measuring
If you want to measure again, press ‘start’ button to switch off and press ‘start’ button again.
•
Leave at least three minutes between measurements to
allow blood circulation to the arm to return to normal.
•
Do not measure your blood pressure too many times in
one session as it may cause discomfort in the arm.
•
If you feel any discomfort or pain, turn the monitor off
and remove the cuff immediately.
Shut Down
Please turn the unit off after measurement if not re-measuring.
•
The unit has an automatic ‘switch off’ mechanism which
means it will turn off after 1 minute if not being used.
16