Kinetik Blood Pressure BPM1KTL - Manual (Page 12)

Using your Blood Pressure Monitor
11
d. After selecting the memory bank, the monitor starts to seek zero
pressure.
e. The monitor inflates the cuff until sufficient pressure has built up
for a measurement. Then the monitor slowly releases air from the
cuff and carries out the measurement. Finally the blood pressure
and pulse rate will be calculated and displayed on the LCD
screen separately. The irregular heartbeat symbol (if any) will be
displayed on the LCD. The result will be automatically stored in
the current memory bank.
f. After measurement, the monitor will turn off automatically after 1 minute of no operation.
Alternatively, you can press the ‘start’ button to turn off the monitor manually.
g. During measurement, you can press the ‘start’ button to turn off the monitor manually.
• Please consult a health care professional for interpretation of pressure measurements.
• When the monitor displays the measurement results, the backlight will show a different color
according to the systolic and diastolic pressures. Refer to the “Backlight Indicator and Classification of
Blood Pressure” section.