beautypg.com

Measurements optional picture taking – Bowflex Blaze Home Gym User Manual

Page 62

background image

62

Using Calipers When Measuring Skinfolds

The procedure for measuring skinfold thickness is to grasp firmly with the thumb and forefinger a fold of
skin and surface fat and pull it away from the underlying muscle. Take the caliper in your other hand and
open the jaws. Clamp the jaws over the pinched skin and fat. The jaws exert constant tension at the point
of contact with the skin. The thickness of the double layer of skin and fat can then be read directly from
the caliper, which is marked in millimeters.

Use these figures on the following chart to

determine your body-fat percentage and enter

the number on the line below.

Starting body-fat percentage

Women

Suprailium

Triceps

Thigh

Total

Men

Chest

Abdomen

Thigh

Total

Measurements

Optional Picture Taking

Pictures can be the most exciting evaluation you
can do. The numbers and the tape measurements
are great, but actually seeing differences from
comparison photographs of yourself is quite
satisfying.

Taking full-length photographs is not difficult, but
to see the maximum difference between before and
after, you should follow these guidelines.

1) Keep everything the same. Wear the same outfit,

a snug solid color is best, and have the person
taking the picture stand in the same place, with
the same setting behind you.

2) Make sure you stand against an uncluttered,

light background.

3) Have the person taking the photograph move

away from you until he can see your entire body
in the viewfinder.

4) Stand relaxed for three pictures, front, right side,

and back. Do not try to suck in your stomach.

5) Interlace your fingers and place them on top of

your head, so the contours of your torso will be
plainly visible. Keep your feet 8” (20 cm) apart in
all three pictures.

6) When you get the film developed tell the

processors to make your after photos the same
size as your previous ones. This way, your height
in both sets of photos is equal and more valid
comparisons can be made.