JULABO FT902 Immersion Coolers - Manual (Page 16)

Preparations
16
Pt100
The immersion coolers are provided with a Pt100 sensor 200x6 mm dia.,
stainless steel - Order No. 8 981 003
 Connect the Pt100 sensor to the connector (Pt100) .
 To prevent the immersion probe (A) from icing, it should be completely
immersed into the bath liquid (B).
FT902 FT402
A
B
S S
120 mm
minimum
Important:

Place the external sensor (S) into the bath medium and securely fix the
sensor.

FT902: The diameter of the bent probe should not be less than
120 mm.
Accessories: Order No. Description
8 981 005 Pt100 sensor 200x6 mm dia., glass, 1.5 m cable
8 981 010 Pt100 Fühler 300x6 mm dia., stainless steel, 1.5 m cable
8 970 400 Clamp for cooler probe FT402