Connecting with your phone automatically, English – Jabra DRIVE User Manual

Page 8

english

Jabra DrIVE

4 Your phone will find the Jabra DRIVE
Your phone will find the speakerphone under the name “Jabra

DrIVE” . Your phone then asks if you want to pair with the Jabra

DrIVE . accept by pressing ‘Yes’ or ‘OK’ on the phone and/or

confirm with the passkey or PIN = 0000 (4 zeros) . Your phone will

confirm when pairing is complete .

CONNECTIVITY

SELECT

MobilSurf

BLUETOOTH

Infrared port

Wap options

Synchronization

Networks

DEVICES FOUND

Jabra DRIVE

Passkey:

****

HANDSFREE

SELECT

Jabra DRIVE

added.
The handsfree is

now ready for use

SELECT

Manual pairing mode
If you wish to use the speakerphone with a different phone, or

if the pairing process was interrupted, you can manually set the

speakerphone to pairing mode .
Turn the speakerphone on . Press and hold the answer/end button

for approximately 5 seconds until the status light stars blinking

rapidly blue . Then repeat steps 2 . and 3 . in the above pairing

guide .

ConneCtInG WItH YoUR PHone AUtoMAtICALLY

Pairing is only needed the first time a speakerphone and phone

are used together . When the speakerphone and phone have

been paired once they will automatically connect when the

speakerphone is on and Bluetooth® is activated on the phone . The

speakerphone can be used when it is “connected” to the phone . If

the devices are paired, but do not immediately connect, tap the

answer/end button .