Jabra DRIVE - Manual (Page 6)

5
english
Jabra DrIVE
GettInG stARteD
You should follow three steps before using your speakerphone
1 Charge your Jabra DRIVE
2 Turn your Jabra DRIVE on
3 Pair your Jabra DRIVE with your mobile phone
The Jabra DrIVE is easy to operate . The answer/end button on the
speakerphone performs different functions depending on how
long you press it .
CHARGInG YoUR JABRA DRIVe
Make sure that your speakerphone is fully charged for two hours
before you start using it .
Use the USb cable to connect Jabra DrIVE to the car charger . Plug
the car charger into your car’s power outlet . The status light will
light up red while charging . When fully charged the status light
turns green . Jabra DrIVE can be charged outside your car by only
using the USb cable . Use only the charger provided in the box - do
not use chargers from any other devices as this may damage your
speakerphone .
Please note: The lifetime of the battery will be significantly
reduced if your device is left uncharged for a long period . We
therefore recommend that you recharge your device at least once
a month .