beautypg.com

Volume adjustment switching on/off, Volume adjustment, Switching on/off – Blaupunkt ALICANTE CD30 User Manual

Page 8: Setting the power-on volume

background image

27

27

ENGLISH

DEUTSCH

FRANÇAIS

IT

ALIANO

NEDERLANDS

SVENSKA

ESP

AÑOL

POR

TUGUÊS

Volume adjustment

The system volume can be adjusted in
steps from 0 (off) to 66 (maximum).

To increase the system volume,
turn the volume control

3

to the

right.

To decrease the system volume,
turn the volume control

3

to the

left.

Setting the power-on volume

You can set the unit’s default power-on
volume.

Pressing the MENU

<

button.

Press the

:

button.

“ON VOLUME” appears in the display.

Set the power-on volume using the

and buttons

:

.

To assist you in setting the power-on
volume, the volume will change in re-
sponse to the changes you make.

If you set the power-on volume to 0:
every time you turn the unit on, the
power-on volume will be the same as
the volume level that was set before the
unit was last switched off.

Risk of serious injury.

If the power-on volume is set to maxi-
mum, the volume level can be very
high when the unit is switched on.
If the volume was set to maximum
before the unit was switched off and
the power-on volume is set to 0, the
volume level can be very high when
the unit is switched on again.
This can cause hearing damage.

Switching on/off

There are various ways of switching the
unit on/off.

Switching on/off using the vehicle
ignition.

If the unit is correctly connected to the
vehicle’s ignition, it will switch on/off si-
multaneously with the ignition.

You can also switch the unit on even if
the ignition is off.

To do so, press button

4

until the

unit turns on.

Note:
To protect the vehicle battery, the unit
will switch off automatically after one
hour.

Switching on/off using the remov-
able control panel.

Remove the control panel.

The unit switches off.

Attach the control panel again.

The unit switches on. The settings (ra-
dio, CD or CD changer) that were set
before the unit was switched off will be
reactivated.

Switching on/off using button

4

.

To switch the unit on, press button

4

.

To switch the unit off, press button

4

for longer than two seconds.

VOLUME ADJUSTMENT

SWITCHING ON/OFF