beautypg.com

Radio mode – Blaupunkt ALICANTE CD30 User Manual

Page 10

background image

29

29

ENGLISH

DEUTSCH

FRANÇAIS

IT

ALIANO

NEDERLANDS

SVENSKA

ESP

AÑOL

POR

TUGUÊS

are transmitting different pro-
grammes.

Note:
REG has to be additionally activated/
deactivated in the unit’s menu.

Switching REG on/off

Press the MENU button

<

.

Keep pressing the button

:

until “REG” followed by “ON” or
“OFF” appears in the display.

To switch REG on/off, press the
or button

:

.

Press the MENU button

<

.

Switching the RDS function on/off

To use the RDS functions (AF and
REG), press the RDS button

5

.

The RDS functions are active when
“RDS” lights up in the display. When the
RDS functions are switched on, “REG
ON” or “REG OFF” appears briefly in
the display.

Selecting the frequency range /
memory

This unit can receive programmes
broadcast over the UKW (FM), MW and
LW frequency ranges (MW and LW are
not available on the Kiel C30). There are
three preset memory levels for the FM
range and one for each of the MW and
LW ranges. Five stations can be stored
on each memory level.

Selecting the UKW (FM) memory

Press the FMT or FM

2

button to

switch between the various UKW
memory levels.

Selecting the MW and LW memory

Press the M•L

6

button to switch

between the MW and LW memory
levels.

Tuning into a station

There are various methods available for
tuning into a station.

Automatic station search mode

Press the or button

:

.

The unit tunes into the next receivable
station.

Setting the sensitivity of the
station search mode

You can configure the radio to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.

Press the MENU button

<

.

Keep pressing the

:

button

until “SENS” appears in the display.

Press the button

:

.

The display shows the currently set
value for sensitivity. “SENS HI6” means
that the tuner is highly sensitive. “SENS
LO1” means it is set to the lowest sen-
sitivity setting. If “SENS LO” is selected,
“lo” lights up in the display.

Set the required sensitivity using
the and buttons

:

.

When you have finished making
your changes, press the MENU
button

<

.

RADIO MODE