Induro 3D PanHead - Manual (Page 2)

USER NOTICE
Quick Release Plate
Horizontal Tilt Lock
Plate Locking Lever
Pan Lock
Base
Camera Screw
Bubble Level
Front/Rear Tilt Lock
Security Locking Lever
Do not exceed the maximum specified
c
load capacity (see Specification chart)
Always ensure that leg and head locks
c
are tightly engaged before mounting a
camera on the tripod
Do not use the tripod below
c
temperatures of -4°F or above +158°F
(-20°C / +70°C)
Always clean and dry the tripod after it
c
has been exposed to wet, dusty, sandy
or salty conditions. Your tripod is not
recommended for use in salt water.
If required clean tripod using a mild
soap solution applied with a soft cloth
and follow by wiping down with fresh
water. Remove any dust, dirt or sand
from all leg locks, leg lock levers,
leg sections and all moving parts.
Do not leave the product in the sun
c
for prolonged periods and avoid high
temperature exposure
Avoid leaving the tripod unattended in
c
areas where people could trip over the
tripod and get hurt
Remove camera, lens, and all gear
c
from the tripod when transporting
the tripod
For your safety, don’t let your Induro
c
tripod come in contact with any
electrical power source