Humanscale Liberty Back Pin Replacement Instructions - Manual

Operation #
Back Pin Replacement
Model #
All
Page
1/2
Process Description
Back Pin Replacment
Work Content - Verify – TQC
Repeat for other side. 4
Pull Pin from opposing side with fingers or if
sticky, pliers work well. While removing Pin
pinch the back frame and the lower back
together to keep the holes aligned. 2
Insert new pin into back and tap in gently using
a mallet. The pin should slide in easily. ** Once
seated a good firm tap should be given to the
pin to insure that it is in completely. 3
* If changing pins on more then ten chairs a
special tool can be requested from the factory
that must be returned upon job completion.
** If pin is not going in easily see page two of
instructions.
Drive the back pin out of the chair from the
inside using a punch/Allen key and a mallet. * 1
Description Step
Date
12/22/05
Rev #
1
Drive Pin
from here