Esl600 series operation manual, Service, Warranty – HMC Electronics CESL611-ESD Delta Regis Brushless Electric Screwdriver User Manual
Page 5
The ‘BECT6’ Series Controllers are not user serviceable. Any repairs must be performed by a Delta Regis
authorized service center. Please consult Delta Regis Tools for further information and the location of the
nearest authorized service center.
Repairs to ‘ESL6’ series screwdrivers must be performed by trained personnel, knowledgeable and
qualified in the repair of DC electric screwdrivers. Use only genuine Delta Regis parts when servicing
these products.
Do not attempt to modify the tools or controllers.
Service
The ESL600 Series Tools and Controllers are warranted for one year from the date of purchase against
defects in material and workmanship. In addition, the brushless motor in the ESL600 Series Screwdriv-
ers is warranted for three years from the date of purchase against defects in material and workmanship.
This warranty does not cover damage due to transportation, abuse, misuse, or improper service. Our sole
remedy is to repair or replace (at our discretion) any unit found to be defective due to defects in material
or workmanship. It is the responsibility of the user to return any product thought to be defective, freight
prepaid, to our warehouse for inspection and evaluation.
There is no warranty of merchantability or fitness of purpose. In no event will Delta Regis Tools, Inc.
be liable for business interruptions, loss of profits, harm, injury, damage, personal injury, cost of delay,
or any other special, indirect, incidental, or consequential losses, costs, or damages.
Warranty
Page 5
Torque Adjusting Nut
Turn to adjust torque. Higher values on scale
indicate higher torque. Numbers on the scale
are for reference only and are not a torque
indication.are not a torque indication.
Bit Holder
Retract sleeve to
insert/remove bits.
Housing Nut
Remove housing nut to
install torque locking sleeve.
Trigger
Suspension Ring
Use to suspend the tool.
Forward/Reverse Switch
Three position switch with center position
being OFF. The OFF position is recommended
when changing bits.
ESL600 Series
Operation Manual
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440