BenQ CP120C - Manual (Page 33)

Using the projector 27
Shutdown
• Do not unplug the power cord before the projector shutdown sequence is complete or during
the cooling down process.
• If the projector is not properly shut-down, you risk damaging the lamp. Do not move the
projector whilst the lamp is hot.
1. Press the Power button and a prompt message appears. Press the Power button a
second time to turn the projector off.
2. The POWER indicator light flashes orange
and the lamp shuts down, the fans continue
to run for the time duration as determined
by the Quick Cooling function (see
"Quick
Cooling (On)" on page 33 ) to cool down
the projector.
To protect the lamp, the projector will not
respond to any commands during the
cooling process.
3. Disconnect the power cord from the wall
socket.