Billion Electric Company BIPAC 6404VGP - Manual (Page 12)

VoIP/(802.11g) Broadband Firewall Router
Chapter 3: Basic Installation
11
Connecting Your Router
1. (a)
ATA Mode: Connect the ATA to a WAN (Connect to ADSL modem/router).
(b) Broadband Router Mode: Connect the Router to a LAN (Local Area Network) and WAN
(Connect to Cable or ADSL modem).
2. Power on the device.
3. Make sure the PWR and SYS LEDs are lit steadily and that the WAN and relevant LAN LED are lit.
4. Connect an RJ11 cable to VoIP port when connecting to an analog phone set.
5. Connect RJ-11 cable to LINE Port when connecting to the telephone wall jack.
ATA Mode
Broadband Router Mode