Great Northern Popcorn 7976 Frosty Keg Kegerators - Manual (Page 14)

Copyright 2011 DTX International
14
MAINTENANCE & STORAGE
To clean the lines and tap, first:
3. Disconnect the beer hose from the tap coupler and twist dispenser faucet carefully off the top of the
kegerator.
1. TURN OFF CO2.
2. Next, wipe the outside of the kegerator, clean drip tray and around guardrail. Clean the inside of the
cabinet by wiping with a damp cloth. Clean gasket on door to help eliminate trapped, spilled beer which
could produce mold and mildew.
4. Set the dispenser handle to the open or down position before flushing, then position the faucet over a sink
and hold the beer line under running water for approximately 5 minutes, allowing the water to flush out the
faucet head. This will also
5. Reconnect beer line and dispenser faucet when done or leave disconnected if you plan to store for a long
period.
help eliminate trapped, spilled beer which could produce mold and mildew.
CLEANING & MAINTENANCE
For further information, please contact [email protected]