Great Northern Popcorn 6301 Vortex Cottaon Candy Machines - Manual (Page 7)

ASSEMBLY PROCEDURES
Please consult the Electrical Specifications section on page 5 of this manual before operating.
Unpacking Your Machine
1. Open the shipping cardboard box and
remove the foam packers in each corner
(Figure A).
2. The cotton candy pan is packed upside
down over the motor assembly (Figure B).
Remove the pan and set aside.
3. The spinning head and motor assembly is
packed directly beneath the inverted pan
and protected by foam (Figure C). Remove
the foam and locate the cart assembly
instructions, scoop and replacement motor
belts packet (Figure D) and set aside.
4. Carefully remove the head and motor
assembly. Do not tilt or lean the body of the
machine more than 45 degrees (Figure E).
Test the drawer (Figure F) to ensure that it
slides freely.
5. Open and confirm the contents of the
packet (Figure G). The plastic packet
should contain instructions for cart
assembly, a floss scoop and (2)
complimentary motor belt replacements.
6. Inspect your machine for any loose parts or
screws. Check to make sure that the rubber
feet are securely fastened (Figure I) and
inspect the power cord and plug (Figure H).
If the plug or cord are damaged, DO NOT
ATTEMPT TO START MACHINE. Instead,
call support or
contact us online
(See page 5 for
contact details).
7
Figure A Figure B
Figure C Figure D
Figure F
Figure E
Figure G Figure H Figure I
Copyright 2012 DTX International All Rights Reserved