Belkin Wireless N Router N300 User Manual

Page 30

TROUblesHOOTInG, sUPPORT, anD WaRRanTY

belkin setup cannot connect my Router to the Internet .

If Belkin Setup is not able to connect the Router to

the Internet, please check the following items:

1 . Use the troubleshooting suggestions within Belkin Setup.

2 . If your ISP requires a user name and password, make sure that

you have typed in your user name and password correctly. Some

user names require that the ISP’s domain may be at the end of the

name. Example: “[email protected]”. The “@myisp.com” part of

the user name may need to be typed as well as your user name.

3 . If you continue to have no Internet connection, refer

to “Manually Configuring Network Settings” in this

manual for an alternative setup method.

belkin setup completed installation, but I cannot browse the

Web . The light on the front of my Router is blinking amber .

1 . Make sure the Router is connected to your modem with an

Ethernet cable via the Router’s one WAN (modem) port.

2 . Unplug the modem from its power source and make sure

that it goes dark. Then reapply power to the modem.

3 . Unplug your Router’s power supply, wait 10 seconds,

and plug it back in. This will cause the Router to try

to reestablish communication with the modem.