Gast SDR6 User Manual
Page 6
RECOMMENDED ACCESSORIES
The following diagrams are only suggested configurations for these accessories. These accessory configurations may
vary depending upon a particular unitʼs application.
For Model Number
R3, R4, R5
R4, R4H,
R4H, R4M,
R4M, R6,
R4P, R5
R5, R6,
R6P, R6PP,
R6P, R6PS,
R7, R7P,
R7S, R9,
R9S
Part Number
RMS160
RMS200
RMS300
RMS400
CFM capacity
160
200
300
400
Liquid capacity (gal.)
10
19
19
40
Diameter (A)
14.8”
19.7”
19.7”
24”
Dimension (B)
37.5”
35”
35”
44”
NPT outlet (C)
2”
2”
2.5”
3”
Inlet diameter (D)
2”
2”
2.5”
3”
Dimension (E)
7.5”
7.5”
7.5”
9.7”
Dimension (F)
26.6”
26.6”
26.6”
29”
Model Number
R1, R2
R3
R4, R5, SDR4,
R6, R6P, SDR6P,
R7, R7S
SDR4, R4P
SDR6, R6PS
Part Number
AH326B
AH326C
AH326D
AH326F
AH326G
Dimension (A)
3.57”
4.19”
4.50”
5.25”
8.00”
Dimension (B)
2.32”
2.69”
2.94”
3.82”
5.07”
Dimension (C)
1.00” NPT
1.25” NPT
1.50” NPT
2.00” NPT
2.50” NPT
MOISTURE SEPARATOR (FOR VACUUM)
This moisture separator removes liquids from the gas stream in a vacuum process.
This helps protect the blower from corrosion and the build up of mineral deposits.
HORIZONTAL SWING TYPE CHECK VALVE
This check valve prevents backwash of fluids from entering the blower and air back-streaming.
The check valve can be mounted to discharge or inlet either vertically or horizontally. The check
valve will open with 3” of water pressure or vacuum.
Maximum vacuum allowed: 22” Hg.
X
Explosion-proof, high level
float switch AJ213 (optional).
6