Fulltone Supa-Trem User Manual
Supa-trem, By fulltone
Trimmer #1: (see photo) Turning this
trimmer CW (clockwise) increases the
Volume of the pedal only when the
pedal is turned ON.
Trimmer# 2 (see photo) adjusts the
amount of “juice” (current) that gets to
the photocell and ONLY affects the
“soft mode.“ For a change in the feel of
the tremolo, turn this Clockwise for a
more intense/hard-edged rolling feel, or
CCW for a softer more natural feel.
Congratulations on your purchase of
the
Supa-Trem
TM
by
Fulltone!
Bypass switch- Turns pedal on and off...when unit is off, signal goes from input to output
and won't ruin your sound or affect other pedals in chain.
Speed switch- doubles or halves the speed depending on what
mode you're in....stays in tempo too!
Hard /Soft switch- goes from regular tremolo to hard on/off "toggle-switch"
style stutter no matter where the "Mix" knob is set
Rate knob- controls speed of tremolo
Mix knob- pans between straight guitar sound and tremolo
effect....towards the left is less effect/more
guitar...to the right gets more effect, less guitar.
Internal Trimmers: