Flex TPO Bonding Adhesive - Manual (Page 3)

___________________________________________________________________________________________________
Flex Membrane International Corp. 2670 Leiscz’s Bridge Road, Suite 400, Leesport, PA 19533
Tel: (610) 916-9500 Fax: (610) 916-9501 www.FlexRoofingSystems.com
Page 3
9. Opened containers of Flex TPO Bonding Adhesive should be used within 48 hours. Adhesives
will begin to thicken after this point, making it difficult and eventually impossible, to control
applied thickness. In hot weather, do not leave sealed containers on roof for prolonged periods of
time. In cold weather, keep material at room temperature until ready to use. Stir adhesive
occasionally while using.
10. Adhesive must be allowed to dry thoroughly. If membrane is mated with the substrate prior to
the adhesive being dry, blistering will occur and not subside over time.
11. KEEP OUT OF THE REACH OF CHILDREN.
This product is approved for use by Flex authorized applicators only and is for use in Flex TPO
Membrane roofing installations.
*
Physical properties. Typical properties and characteristics are based on samples tested and are not
guaranteed for all samples of this product.
** REVIEW CURRENT FLEX SPECIFICATIONS AND DETAILS FOR SPECIFIC
APPLICATION REQUIREMENTS.