Flex Bonding Adhesive - Manual (Page 2)

_____________________________________________________________________________________________________
Flex Membrane International Corp. 2670 Leiscz’s Bridge Road, Suite 400, Leesport, PA 19533
Tel: (610) 916-9500 Fax: (610) 916-9501 www.FlexRoofingSystems.com
Page 2
TYPICAL LIQUID PROPERTIES AT 77°F
Color: Amber / Yellow
Base: Neoprene
Solids (Weight): 25%
Specific Gravity: 0.87
Pounds per Gallon: 7.25
Viscosity, cps:
(Brookfield RVT Spindle No. 4 at 20 rmp) 2500
Estimated Coverage: 55-70 sq ft/gal
(2-2 ½ dry mils coated both sides)
DOT Label Required: Flammable Liquid UN 1133
Code: 584661
PRODUCT HANDLING
Flex Bonding Adhesive 2375 contains ingredients which could be harmful if mishandled.
Contact with skin and eyes should be avoided and necessary protective equipment and clothing
should be worn. All five gallon pails and larger metal containers should be grounded and/or
bonded when material is transferred. Vapors are heavier than air and may travel along the ground
or may be moved by ventilation and ignited by pilot lights, other flames, sparks, heaters,
smoking, electric motors, static discharge, or other ignition sources at locations distant from
material handling point. Never use welding or cutting torch on or near drum (even empty)
because product (even residue) can ignite explosively.
Flex Membrane International maintains Material Safety Data Sheets on all of its products.
Material Safety Data Sheets contain health and safety information for your development of
appropriate product handling procedures to protect your employees and customers.
Flex’s Material Safety Data Sheets should be read and understood by all of your
supervisory personnel and employees before using Flex products in your facilities.
STORAGE
When Flex Bonding Adhesive 2375 is stored indoors, out of direct sunlight, and in the original,
unopened container between 60°F and 80°F, the shelf life is twelve months. Always rotate stock.