Blaupunkt ST. LOUIS C33 - Manual (Page 26)

8
Switching on/off
There are various ways of switching the
unit on/off:
Switching on/off using the vehicle
ignition
If the unit is correctly connected to the
vehicle’s ignition and it was not switched
off using button
2
, it will switch on/off
simultaneously with the ignition.
Switching on/off using the
removable control panel
➮
Remove the control panel.
The unit switches off.
➮
Attach the control panel again.
The unit switches on. The last settings
i.e. radio or CC will be reactivated.
Switching on/off using button
2
➮
To switch the unit on, press button
2
.
The unit can only be switched on when
the ignition is turned on.
➮
To switch the unit off, press button
2
for longer than two seconds.
The unit switches off.
Adjusting the volume
The system volume can be adjusted in
steps from 0 (off) to 100 (maximum).
To increase the system volume,
➮
turn the volume control
3
clock-
wise.
To decrease the volume,
➮
turn the volume control
3
anti-
clockwise.
Setting the power-on volume
You can set the unit’s default power-on
volume.
➮
Press the MENU button
8
.
➮
Keep pressing the or button
8
until “ON VOL” appears in the
display.
➮
Set the power-on volume using the
and buttons
8
.
To help you adjusting the volume more
easily, the volume will be increased /
decreased as you make your changes.
When you have finished making your
changes,
➮
press the MENU button
8
twice.
Instantaneously reducing the
volume (mute)
You can instantaneously reduce the
volume (mute) to a level preset by you.
➮
Briefly press button
2
.
“MUTE” appears in the display.
SWITCHING ON/OFF ADJUSTING THE VOLUME