Feiss MR1089 Mirror - Manual

Carefully unpack and identify all parts before assembly.
1. Lay frame, with screw holes side facing up, on a non-abrasive
surface.
2. Lay glass mirror face down on top of frame. Make certain
glass mirror is centered within frame.
3. Secure glass mirror to frame by fastening 2 brackets with 4
small screws as shown in illustration. Install bracket with
hanging loops attached to top of frame.
4. At desired wall location, install two picture frame hangers
(rated for over 50LBS.) (not included) into wall at
corresponding position with hanging loops on back of mirror
frame. Note: Use a level to insure mounting position is
horizontal. Check certain the picture hangers or screws are
securely fastened onto wall to adequately support the weight
of the mirror. If not certain, consult a qualified technician.
5. Carefully hang mirror onto wall.
Assembly Instructions For
MR1089
Glass Mirror
Bracket
Screw
Frame
(E) 3/08
Hanging Loop