Feiss MR1045 Mirror User Manual
Ssembly, Nstructions
(E) REV: 11/20/03
A
SSEMBLY
I
NSTRUCTIONS
F
OR
MR1045, MR1046
M U R R A Y F E I S S
©MURRAY FEISS IMPORT CORP.
Carefully unpack and identify all
parts before beginning assembly.
1. Lay frame, with screw holes side facing
up, on a non-abrasive surface.
2. Gently lay glass mirror, with metal
mirror brackets side facing up, on top of
frame. holes in mirror brackets must
align with holes in frame.
3. Secure glass mirror onto frame with 2
screws and lock washer at top and
another set at bottom.
4. Measure distance between center points
of 2 slots on top metal mirror bracket.
Install two picture frame hangers
(not included) into wall at
corresponding position.
Note: Use a level to insure mounting
position is horizontal. Make certain the
picture hangers are securely fastened
onto wall to adequately support the
weight of the mirror. If not certain,
consult a qualified technician.
5. Carefully hang mirror onto wall.
Screws and
Lock Washer
Glass Mirror
Measure
Distance
Frame
Mounting Slots
Slot for
picture
hanger
Metal
Mirror
Bracket
Suggested picture
hangers (Over 50 LB.
Capacity) (not included)