Product features installation procedure – FastenMaster GutterScrew User Manual
Page 2

FMGUTSHEET
(0211)
WHITE OR BROWN
COLOR MATCHED HEAD
GUARANTEED
CORROSION RESISTANT
ZINC BASECOAT
ELIMINATES RED RUST
#3 SQUARE DRIVE
REDUCES BIT
CAM-OUT
.310 DIAMETER THREAD
GRIPS EXISTING .250
DIAMETER HOLE
FASTENMASTER, INC., 153 BOWLES ROAD, AGAWAM, MA 01001
800.518.3569 WWW.FASTENMASTER.COM
FastenMaster
®
and GutterScrew
™
are trademarks of OMG, Inc. Copyright © 2011 OMG, Inc. All rights reserved.
PRODUCT FEATURES
INSTALLATION PROCEDURE
For existing gutters installed using spikes,
first remove the existing spike and ferrule.
With a standard drill install the
FastenMaster GutterScrew and ferrule
using the #3 square drive bit provided.
For new gutter installations, pre-drill a ¼"
hole with spacing as recommended by the
gutter manufacturer. Then install the new
gutter screw and ferrule as instructed above.
Note that the 7" FastenMaster GutterScrew
is recommended for use with 5" standard
residential gutter systems.
Part Number
Screw
Length
Color
Qty. per
Pack
FMGUT007-10BR
7"
Brown
10
FMGUT007-10W
7"
White
10
FMGUT007-25BR
7"
Brown
25
FMGUT007-25W
7"
White
25