beautypg.com

Setting up your computers – Belkin P75125UK User Manual

Page 19

background image

17

16

Setting Up your Computers

17

16

Setting Up your Computers

4.

Select the “TCP/IP” tab

(3). Next to “Configure” (4), you should

see “Manually” or “Using DHCP”. If you do not, check the
PPPoE tab

(5) to make sure that “Connect using PPPoE” is NOT

selected. If it is, you will need to configure your Router for a
PPPoE connection type using your user name and password.

5.

If “Manually” is selected, your Router will need to be set up for

a static IP connection type. Write the address information in
the table below. You will need to enter this information into the
Router.

6.

If not already selected, select “Using DHCP” next to “Configure”

(4), then click “Apply Now”.

Your network adapter(s) are now configured for use with the Router.