Eschenbach Optik Quicklook Classic - Manual (Page 11)

11
Reset
If Quicklook stops responding to button
presses it may need to be reset. Using a
pen or similar instrument, press the reset
button recessed into the underside of the
unit near the camera.
Fitting the wrist strap
Quicklook is supplied with an optional wrist
strap. To fit this, pass the thin loop of the
strap through the hoop on the top of the
unit. Pass the entire strap through the thin
loop and pull tight.
Maintenance
Dirt and finger marks on the screen should
be cleaned with the lens cleaning cloth
provided. If Quicklook becomes dirty it can
be cleaned with a damp cloth and mild
detergent. Never use any type of solvent or
abrasive cleaning agents. Do not immerse
Quicklook in water!