Using the prisma hd – Eschenbach Optik Prisma HD User Manual
Page 7
Page 7
Prisma HD English Rev 1.00
focus at high magnification correctly. If the image does not
appear to be in focus, try raising or lowering the camera to
correct it.
Brightness
The image brightness can be adjusted to suit your
preference. Press and hold the Mode button for three
seconds until the unit beeps. Use the Zoom Up and Zoom
Down buttons to adjust the image as desired. Press Mode
again to save the setting. The setting you choose will be
saved and used subsequently for that mode of operation.
Freeze
To freeze the image, press and hold the Overview button
until the beep is heard. The Mode button will operate as
normal but pressing any other button will unfreeze the
image.
Using the Prisma HD
Reading with the Prisma HD
Place the Prisma HD on a suitable table near the television
and sit in front of it. Ideally the television should be at eye
level or slightly below, and the Prisma HD reading table
should be level with your elbows when seated. A good
reading position prevents problems with your back, neck
and arms.