Eschenbach Optik Presto - Manual (Page 2)

Page 2
Presto User Manual Rev A EN
Important Safety Information
Please read all of the following instructions
before setting up your Presto. Failure to follow
these instructions properly could lead to
physical injury.
• The Presto must be used on a flat, level table. Never
attempt to use it on a sloping surface or on a table
that cannot accommodate the full footprint of the unit.
• The front of the Presto must be placed at least 10cms
or 4 inches back from the edge of the table. This is to
prevent the unit from tipping forward if excessive
weight is placed on the reading table when fully
extended. There are warning labels placed on the
reading table with arrows indicating the maximum
overhang permissible when the table is fully
extended.
• Both X/Y table and Screen contain moving parts.
Please take care with folding back the screen and
operating the X/Y table. If fingers get caught, injury
might occur. If you feel you cannot operate the unit
safely, please seek advice or contact your supplier.
• Never lift the Presto by the reading table.
• The Presto must only be powered by the supplied
power supply. Using another source of power could
permanently damage the unit and will invalidate your
warranty.