Accessories and consumables for 100ml hotblocks – Environmental Express HotBlock CURRENT User Manual
Page 34

800.745.8218 / 843.576.1147 / www.environmentalexpress.com
Environmental Express
• 32
HotBlock™:
Operation and Instruction Manual
100mL HotBlock™ Accessories and Consumables
Polycarbonate Transfer Racks
This set of two polycarbonate racks was designed to fit the SC150 Hot Block (see
photo page 4). A 15-place rack paired with a 10-place rack give you 25 sample
capacity. Racks fit the SC150 HotBlock™ securely for safe, accurate digestions.
Polycarbonate Tramsfer Racks for SC150 HotBlock™
Set of 2
Catalog # SC225
Wire Storage Rack for SC490s
Powder-coated wire rack shown above is for storing SC490 cups. Rack has an
18-cup capacity.
Wire Storage Rack
Each
Catalog # SC7150
Temperature Probe
This temperature probe fits SC490 cups and allows the analyst to monitor actual
temperature in a 100mL sample. The digital thermometer is adjustable in a Teflon®
holder to allow placement of the thermometer tip in desired position in cup.
Thermometer has LCD display and may be read in either Fahrenheit or Celsius.
Temperature Probe (thermometer to 150ºC) for SC490
Each
Catalog # SC981
Disposable Polypropylene Digestion Vessels for use with SC150 HotBlock™
This 125mL, wide-mouth digestion vessel is supplied with a 48mm screw cap. The
cap is lined with coextruded polyethylene foam for leak-proof performance. Made
of homopolymer polypropylene, the SC490 digestion vessel is designed for use in
the SC150 HotBlock™. Vessels are graduated at 10mL, 25mL and 50mL, 75mL and
100mL.
Disposable 125mL Digestion Cup
Pack of 225
Catalog # SC490
Ribbed Watch Glass
52mm ribbed watch glass is designed for use with SC490, 125mL digestion vessel.
The disposable polypropylene watch glass has a stem in its center to aid in
handling.
Ribbed Watch Glass, 52mm
Pack of 500
Catalog # SC610
Accessories and Consumables for 100mL HotBlocks™