Enerpac XC-Series User Manual
Page 2
5
4
General Safety
Never set the relief valve to a higher pressure than the maximum
rated pressure of the pump. Higher settings may result in equipment
damage or personal injury. Do not remove relief valve.
To avoid personal injury keep hands and feet away from cylinder and
work piece during operation.
Do not handle pressurized hoses.
Escaping oil under pressure can penetrate the skin, causing serious
injury. If oil is injected under the skin, see a doctor immediately.
Do not pressurize disconnected couplers.
Safety First
Read all instructions, DANGER, WARNING and
CAUTION paragraphs carefully.
Follow all safety precautions to avoid personal
injury or property damage during system
operation. Save these instructions.
ENERPAC cannot be responsible for damage or
injury resulting from unsafe product use, lack of
maintenance or incorrect product and/or system
operation. Contact ENERPAC when in doubt as
to the safety precautions and operations
Conformance to
National & International
Standards.
We declare that this product has been tested
and conforms to applicable standards and is
approved to carry the CE, TUV C and US, and
FCC certification marks. An EC Declaration of
Conformity is enclosed separately.
Model / Serial Number
The model and serial number are found on the
back side of unit, above the battery area.
Important
Danger icons are only used when your action or lack
of action may cause serious injury or even death.
Failure to comply with DANGER, WARNING or CAUTION statements
could cause equipment damage and personal injury.
General Safety
4
Electrical Safety
6
Installation
7
Use
8
Operation 9
Disconnecting 10
Oil Fill
11
Pressure Setting
12
Technical Specifications
13
Troubleshooting 14
Contents