Using quartet 1000 additional handsets, Registering your handset – BT 1100 User Manual
Page 20
18
Quartet 1100 User Guide – Edition 5 – 17.8.00
Using Quartet 1000
Additional Handsets
You can buy and use up to 3 Quartet
1000 additional handsets with your
Quartet 1100 to extend your phone
system, without needing to install
extension sockets for each new phone.
Each additional handset is supplied
with its own charger and user
instructions, but the following
information will tell you how to
register and use an additional handset
with your Quartet 1100.
You must register your Quartet
additional handset before it can be
used with your Quartet base unit.
Make sure that each additional
handset is registered with a different
number (2, 3 or 4) so it can be
identified from other additional
handsets, see page 19.
Registering your
handset
Note
You must charge your additional
handset for 24 hours before
registering it.
To register an additional
handset
Place the handset you wish
to register on the base unit
and then remove it.
Press and hold the base
unit PAGE button for
5 seconds until both the
POWER/IN USE light on
the base unit and the
IN USE/BATTERY LOW
light on the handset begin
to flash.
Release
the PAGE button
and press the TALK button
on the handset.
Your additional handset is
registered automatically and
you will hear a long
confirmation beep and the
IN USE light will stop
flashing.
Page
Page