BT 1100 - Manual (Page 19)

17
Quartet 1100 User Guide – Edition 5 – 17.8.00
If an incoming call arrives while you
are already engaged on a telephone
call, you will hear a soft beep every 5
seconds (this beep is not audible to
the person you are speaking to).
Instead of the engaged tone, the
second caller will hear an
announcement to hold as you are
aware that there is a second call.
Note
To use Call Waiting you will need
to subscribe to the Service from
your network provider. A quarterly
fee is payable.
Call Waiting To use Call Waiting
You can answer the second
call, without disconnecting
your first caller, by pressing
the R button. The first caller
will be put on hold.
When you have spoken to
the second caller you can
return to the first caller by
pressing the R button again.
You can switch back and
forth between the 2 calls
without disconnecting
either if you wish.
If you wish to disconnect
the first call, press the
TALK button after speaking
to the first caller.
The handset will then ring.
Press the TALK button
again and continue with the
second caller.
The second caller will only
be charged for their call
from the moment you answer
and not while they are waiting
for your initial contact.
R
R