Dreams Manhattan Bedstead - Manual (Page 2)

Qty Code Description
In the unlikely event of missing or damaged parts, please
contact the customer service team on 08442 920000.
When
calling this number, please quote the part code
reference numbers shown in this leaflet when
requesting spare or replacement parts.
This assembly requires two
people.
A x16 Bolt (M8x30mm)
Fittings Checklist
C
x16 Spring Washer
(8mm)
D
Flat Washer (8mm)
Additional Tools Required
H x1 Allen Key (4mm)
F x6 Sleeve Nut (M6x1
5mm)
Qty Code Description
B
Bolt (M6x40mm) x6
General Hints & Tips
When fitting barrel nuts into
the panels, ensure they are
fitted the correct way so the
hole is facing towards the
intersecting hole.
Intersecting
Hole
Care & Maintenance
Crosshead Screwdriver
We recommend the bed is
assembled in the room it will
be located in.
K
x6 Flat Washer (6mm)
G
Plastic Nut x28
E
Allen Key (5mm) x1
P Bolt (M6x15mm) x8
Note: The following fittings will be found in the box which contains the sprung slat Frame. They are not in the assembly
kit for the bed itself.
Q Slat Support Legs
Slat Centre Support Leg
x2
x1
Screw (3x20mm) x40
I
J Screw (5x50mm) x28
L Screw (4x30mm) x16
M Bolt (M8x45mm)
N x10
O
Wheel
x8
x24
Page 2 of 6
Please retain your Assembly Instruction and
tools provided, for future use. Periodically
check that all bolts are still tight.