Dreams Angel Bedstead - Manual (Page 2)

Centre Support Leg
Long crosshead (Pozi) screwdriver
Qty Code Description
In the unlikely event of missing or damaged parts, please
contact the customer service team on 08442 920000.
When calling this number, please r quote the part code
reference numbers shown in this leaflet when
requesting spare or replacement parts.
To keep your bed in pristine condition, occasionally,
wipe over with a slightly dampened, clean cloth.
This assembly requires two
people.
A x8 Bolt (M8x30mm)
Fittings Checklist
C
x12 Spring Washer
D
x12 Washer (22x8mm)
Additional Tools Required
H x1 Allen Key (4mm)
F x6 Sleeve Nut (M6x1mm)
Qty Code Description
B
Bolt (M6x40mm) x6
General Hints & Tips
Intersecting
Hole
Care & Maintenance
We recommend the bed is
assembled in the room it will
be located in.
x6 Flat Washer (6mm) G
E
Allen Key (5mm) x1
K Bolt (M6x15mm) x8
Note: The following fittings will be found in the box which contains the Sprung Slat Frame. They are not in the main
hardware pack, of the bed itself.
L
Support Leg M x2
x1
Page 2 of 4
check that all bolts are still tight.
Please retain your Assembly Instruction and
tools provided, for future use. Periodically
Bolt (M8x75mm) x4 I
When they are supplied and are part
of the assembly of this bed, ensure
that barrel nuts are fitted the correct
way so the hole is facing towards the
intersecting hole.