beautypg.com

Fiber-lite – Dolan-Jenner PL800 User Manual

Page 9

background image

Fiber-Lite

®

9

TECHNICAL DATA________________________________

Lamp

150 W Quartz halogen, 21V (EKE, EJV or EJA0 or 20V (DDL) as ordered

Voltages

115 VAC, 200 W, 50/60 Hz or 230 VAC, 1 A, 50/60 Hz (Set at factory)

Lamp Life

200-10,000 Hours depending on intensity

Fuse

115 VAC: 3 Amp, 250V, time delay, 5 x 20 mm
230 VAC: 3 Amp, 250V, time delay, 5 x 20 mm

Color Temperature

3100-3400 degrees Kelvin depending on lamp used

Noise Level

Approximately 21 dB (A)

Safety Approvals

UL

Dimensions

H x W x D (inch): 4.6 x 7.25 x 9.5
H x W x D (cm): 11.7 x 18.4 x 24.3

Weight

12 lbs. (5.5 kg.)

Max. Housing Temp.

9°C above ambient

Type of Use

Indoor at max. altitude of 2,000 M

Installation Category

II

Temperature Range

5°C to 40°C

Relative Humidity

@ 80% maximum up to 31° C decreasing linearly to 50% relative humidity @ 40° C

Pollution Degree

2

Dolan-Jenner Industries, Inc.
159 Swanson Rd.Boxborough, MA 01719, USA
Toll Free: 1.800.83.FIBER
Telephone: 978.263.1400
Fax: 978. 264.0292

Ampoule

150 W halogène quartz, 21 V (EKE, EJV, ou EJA) ou 20 V (DDL) en fonction de la
commande

Tensions

115 V alt, 200 W, 50/60 Hz ou 230 V alt, 1 A, 50/60 Hz (réglé à l'usine)

Durée de vie de l'ampoule

200 à 10 000 heures ; varie selon le réglage de l'intensité

Fusible

115 V alt : 3 A, 250 V, délais, 5 x 20 mm

230 V alt :

3 A, 250 V, délais, 5 x 20 mm

Couleur de la température

3100 à 3400°K selon l'ampoule utilisée

Niveau de bruit environ

21 dB (A)

Certification de sécurité

UL

Dimensions

H x L x P (pouces) 4,6 x 7,25 x 9,5
H x L x P (cm) 11,7 x 18,4 x 24,3

Poids

12 livres (5,5 kg)

Température max. du boîtier

9° C au dessus de la température ambiante.

Environmental Conditions Use Specifications

Corporate Headquarters and Factory:

Conditions d'utilisation et environnement de fonctionnement

NOTICE: if the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment
may be impaired.

CARACTÉRISTIQUES TECHNIQUES___________________________