Belkin F1PI242ENAU - Manual (Page 3)

You will now need to restore the unit to Factory Defaults
Step 1 Open Internet Explorer and type in the Address Bar http://10.1.1.1
(You will be presented with the following screen)
Step 2 In the password field type in admin and click LOGIN
Step 3 Click Advanced Setup
Step 4 Click Tools then Configuration Tools
(You will be presented with the following screen)
Step 5 Place the Dot next to Restore Router to Factory Defaults and click Next
Step 6 Click APPLY
(You will be presented with the following screen)
If you still require further assistance Call: 1300 554 780
contact Belkin Technical Support Visit: www.belkin.com/au/support
TSG-ANZ-VHD-12
Page 3 of 4
GD2417
Self Help Guide