Belkin VoIP - Manual (Page 10)

WPA:-
1) Under Wireless click WPA
2) Click Enable for WPA Function
3) Authentication is Pre-Shared Key – leave all other settings as default
4) In the space provided in Pre-shared Key, create a password – minimum of
eight (8) characters, it can be any combination of numbers and letters
5) Click Save Settings
6) Now click WPA again
7) The password you created earlier is now your ‘Network Key’ or ‘Encryption
Key’. This is the ‘key’ that will be required to be entered on your wireless PC.
8) WPA is now enabled.
Click here for information on how to connect to the Wireless Network.
8