DATOptic eS3-PCIe12-U User Manual

DATOptic Hardware

eS3-PCIe12-U - Quick Reference Manual

P/N: eS3-PCIe21-U - 2x eSATA or SATA III PCI-Express Controller Card

Specification

Model Part Number

eS3-PCIe12-U: eSATA/SATA configurabel PCI-Express
(PCIe) Host Controller

Host Interface

PCI Express V2.0 5Gbps bus

Controller Interface

SATAIII - transfer rate 6Gbps fully compatible to SATA II
and SATA I

Connectors

2x eSATA or SATA connectors @ 6.0Gb per port

Power Requirement:

Operational Voltage : 3.3V/ DC
Operational Current :155mA ~ 400mA

Operating Temp.

0 C to 50 C

Operating Humidity:

5% to 95% non-condensing

System Requirements:

•

Computer with one available PCI-Express slot V2.0 prefer

INSTALLATIONS

eSATA or SATA configration:
Our card is eSATA / SATA port configurable, the defualt setting is 2x SATA ports enable.

To use eSATA or SATA ports, move the jumper as below.

J8 J7 J6 J5 J4 J3 J2 J1

° ° ° ° ° ° ° °

Enable --> eSATA

eSATA Enable --> SATA

SATA

CON2 CON1 CON4 CON3

Hardware Installations:

Power OFF PC and remove its cover.

Select an empty PCI-express slot and insert the SATA Controller.

Makes sure PCI is firmly sit in to PCIe slot

Secure our host controller bracket with a screw.

Close the PC’s cover. Turn PC ON.

For more detail, please refer to computer manual

Software Installation:

Turn computer ON. When Windows boots up, If the AHCI already installed, it
will use Windows AHCI.

To take the full advantage of our card, please use our drivers

http://www.datoptic.com/Drivers/eS3-PCIe12-U.zip

For more detail please refer read me file in the zip file.

Install our drivers and follow the instructons

Confirming Serial ATA Driver Installation

Right click the My Computer icon and select properties.

Click Device Manager in the Menu Tree.

Click the “+” sign in front of IDE ATA/ATAPI controllers. AsMedia 1061 SATA
6G Controller should be seen

eS3-PCIe12-U offers as a driver-less SATA controller in MAC OS.
Just plug and play no driver required

For other OS, please use the latest AHCI drivers.
For support please contact us at:

DATOptic Inc.

1815 E. Wilshire Ave

Suite 906

Santa Ana, CA 92705

Phone: 714 558 1808

Fax: 714 558 3229

Email: support

@datoptic.com

Internet:

http://www.datoptic.com