Danuser 2035 Round - Manual (Page 8)

8
Assembly &
Installation
Skid-Steer Mount
Drive unit and auger
exploded views and part lists
are detailed on separate pages
in this manual.
STEP 1: Bolt cradle assembly (2) to quick attach plate assembly (1) using bolts (3), and
secure with nuts (4). Nuts (4) must be torqued to 115 ft.-lbs.
STEP 2: After removing bucket or other attachment from vehicle, secure quick attach plate
assembly (1) to vehicle per vehicle manufacturer’s recommendations.
STEP 3: Attach knuckle assembly (5) to the drive unit (6) using pin (7). Secure pin (7)
with klik pins (8).
STEP 4: Attach knuckle assembly/drive unit to the quick attach plate assembly (1) using
pin (9). Secure pin (9) with klik pins (8).
= Safety Sign
Location
1
2
3
4
5
11 7
6
10
Because of the weight of
some components, and
because some
components are difficult
to balance, two people are
required for safe
assembly and installation
of this equipment.
Personal protection
equipment including hard
hat, safety glasses, safety
shoes, and gloves are
recommended during
assembly, installation,
operation, maintenance,
removal, or movement of
the earth auger. Do not
allow long hair, loose
fitting clothing, or jewelry
to be around moving
parts.
8
9
REF. NO. PART NO. DESCRIPTION QTY.
1 10499 Quick Attach Plate Assembly 1
(incl. REF. NOS. 1-5, two pcs. of 8, and 9)
2 10965 Cradle Assembly 1
3 10975 Bolt (1/2” 13 x 1-3/4”) 4
4 6196 Nut (1/2” 13) 4
5 10022 Knuckle Assembly 1
6 ----- Drive Unit 1
7 10032 Pin (1-1/4” x 7-5/8”) 1
8 1600 Klik Pin 4
9 9598 Pin (1-1/4” x 7-1/8”) 1
10 10038 Special Retaining Bolt - 2" Hex 1
(3/4” 10 x 4”, Gr. 8, 3/4” of thread)
10039 Special Retaining Bolt - 2-9/16" Rd.
(7/8” 9 x 4-1/4”, Gr. 8, 3/4” of thread)
11 10041 Nut (3/4” 10) - 2" Hex 1
10042 Nut (7/8” 9) - 2-9/16" Rd.