Danuser EP15 Round - Manual (Page 6)

EP6 EP10 EP15
Minimum Hydraulic Flow 6 GPM 10 GPM 15 GPM
Maximum Hydraulic Flow 15 GPM 20 GPM 30 GPM
Maximum Continuous Operating PSI 3000 PSI 3000 PSI 3000 PSI
Maximum Auger Diameter 24 inches 30 inches 36 inches
Output Spindle 2” Hex or 2” Hex or 2” Hex or
2-9/16" Round 2-9/16" Round 2-9/16" Round
PSI TORQUE
2000 1270 Ft.-Lbs.
2500 1587 Ft.-Lbs.
3000 1904 Ft.-Lbs.
6
Drive Unit
Specifications
Torque and output speed specifications are based on theoretical values and are provided for comparative purposes only.
PSI TORQUE
2000 1874 Ft.-Lbs.
2500 2342 Ft.-Lbs.
3000 2811 Ft.-Lbs.
Model EP10
Model EP15
10 48
12 58
14 68
16 77
18 87
20 97
15 49
18 59
20 65
24 78
28 92
30 98
GPM RPM
GPM RPM
PSI TORQUE
2000 1014 Ft.-Lbs.
2500 1267 Ft.-Lbs.
3000 1520 Ft.-Lbs.
Model EP6
6 36
8 48
10 60
12 73
14 85
15 91
GPM RPM