Condux Comfit Transfit Coupler - Manual (Page 2)

transfit Couplers
installation Guide
Condux International, Inc. • 145 Kingswood Drive • PO Box 247 • Mankato, MN 56002-0247
1.800.533.2077 (US & Canada) • 507.387.6576 • Fax: 507.387.1442
www.condux.com• [email protected]
mountinG instruCtions
Transfit Couplers have a push-lock mechanism which enables them to be
installed on pipes without pre-dismantling.
do not take the coupler apart unless absolutely necessary.
Literature Part Number: 08566199-r2.0
1. Bevel the pipe edge with the Transfit Chamfering Tool.
End of pipe must be clean and round.
Keep inside of coupler free from sand and mud.
2. Unscrew coupler ends 2 to 3 threads.
3. Push the Coupler on the pipe until the pipe is flush with
the internal lip.
Retighten ends.