Comelit MT HDDVR160A - Manual (Page 14)

14
3.2 Live configuration
Live configuration includes four submenus: live, host monitor, SPOT and mask.
3.2.1 Live
In this interface, user can setup camera name, adjust colors: brightness, hue, saturation and contrast.
Step1: enter into system configuration
live configuration live; refer to Fig 4-6:
Fig 4-6 live configuration live
Step2: tick off camera name; click “setting” button, a window will pop-up as Fig 4-7:
Fig 4-7 live-color adjustment
Step3: in this interface, user can adjust brightness, hue, saturation and contrast in live; click “default” button
to resort default setting, click “OK” button to save the setting.
Step4: user can setup all channels with same parameters, tick off “all”, then do relevant setup.
Step5: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button
to exit current interface.
3.2.2 Main monitor
Step1: enter into system configuration live configuration host monitor; refer to Fig 4-8:
Fig 4-8 live configuration-host monitor
Step2: select split mode: 1Ч1
、
2Ч2
、
2Ч3
、
3Ч3
、
4Ч4 and channel
Step3: dwell time: the time interval for a certain dwell picture display switching to next dwell picture display