Comelit IPCAM791A - Manual (Page 5)

2
Connecting to the Network
Micro SD memory slot
Connecting the Power
Connection
Connect a standard RJ-45 cable to the network port of the Camera. Generally a
cross-over cable is used for directly connection to PC, while a direct cable is used for
connection to a hub/switch.
Insert the Micro SD memory card up to 32GB.
IPCAM791A: Connect the supplied DC5V power adaptor.
IPCAM794A: Connect the DC 12V power adaptor.
Micro-SD
Power Adaptor
Network Switch
WARNING
Use 5V ONLY power adapter.
DO NOT USE 12VDC/24AV power source.
!